Many homeowners like to use roman blinds in Melbourne for
the fact that they aren’t composed of openings or slats, so they are effective
in completely blocking out the light. By pulling on the accompanying
drawstring, the fabric panel can be raised or lowered into your desired
position. Keep your blinds looking as good as new by cleaning them on occasion:
Step 1: Lower the blind all the way down (until there is no
bunched fabric at the top) and spray it with the canned air that you purchased
earlier. This will help to remove any build up that the fabric may have
attracted. Start from the top of the panel and work your way down.
Step 2: Take a feather duster and run it gently over the
surface of the blind in Melbourne, from one side to the other. This will help
to remove a lot of the dust and other build-ups that the canned air missed.
Step 3: Take the damp cloth and use it to wipe the blinds
gently from side to side, top to bottom. This will remove any dust or build-up
that may be remaining. Be sure to rinse the cloth every few wipes so that you
don’t spread the dust back into the fabric.
Step 4: Make sure that you leave the blinds in the down
position until they have completely dried. You can then lift the panel back up
to your desired height.
Some roman blinds in Melbourne are rubber backed, which
means that you can simply take them down and put them into a bathtub that you
have filled with warm water. Use your hands to rub the fabric and remove any
dirt. Then, rinse the panels in clean water and hang them up to dry before
re-hanging.
0 comments:
Post a Comment